MX1-6-M-B35U-4-4-F-4 2130X000X00IDF022764
The MX series of Gefran, are pressure transmitters for using in High temperature environment and specifically designed for melt pressure measurement and available only to be used in large-scale fixed installations or in large-scale stationary industrial tools, typically extruders, or for laboratory B2B equipments for R&D purposes according to the European Directive 2011/65/EU (see informative note RoHS II). The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of the pressure. The fluid-filled system assures the temperature stability. The phisical measure is transformed in a electrical measure by means the strain-gauge technology.
Added to Your Shopping Cart
- Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
- Extensometric measurement principle with Wheatstone bridge
- Precision: <±0.25% FS (H); <±0.5% FS (M)
- Calibration signal 80% FS internally generated
- Protection level: IP65 (6-pin connector)
- Standard threading 1/2-20 UNF, M18x1.5, other versions on request
- Standard diaphragm is 15-5 PH stainless steel with GTP+ coating
- 17-7 PH corrugated diaphragm with GTP+ coating for ranges below 100 bar-1500 psi
Further versions available on request.
| Rigid Stem Length | 153mm 6' |
| Temperature Class | T4 |
| Fixed | Fixed |
| Accessories | None |
| Fixed | Fixed |
| Options | Calibration Report Included |
| Flexible Stem Length | 760mm 30' |
| Thread | M18 x 1,5 |
| Fixed | Fixed |
| Connector | 6 pin Bayonet |
| Measurement Range | Bar 35 |
| Output Signal | 4...20mA |
| Version | Rigid + Flexible Stem |
| Melt Pressure Transmitter | Mod: MX |
| Accuracy Class | 0,5% FSO |
|
campi_misura_B35U stelo r+f stelo_fles_F filettatura_4 |