text.skipToContent text.skipToNavigation
MXIDCONF-MX

The MX series of Gefran, are pressure transmitters for using in High temperature environment and specifically designed for melt pressure measurement and available only to be used in large-scale fixed installations or in large-scale stationary industrial tools, typically extruders, or for laboratory B2B equipments for R&D purposes according to the European Directive 2011/65/EU (see informative note RoHS II). The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of the pressure. The fluid-filled system assures the temperature stability. The phisical measure is transformed in a electrical measure by means the strain-gauge technology.

Out of Stock

  • Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Extensometric measurement principle with Wheatstone bridge
  • Precision: <±0.25% FS (H); <±0.5% FS (M)
  • Calibration signal 80% FS internally generated
  • Protection level: IP65 (6-pin connector)
  • Standard threading 1/2-20 UNF, M18x1.5, other versions on request
  • Standard diaphragm is 15-5 PH stainless steel with GTP+ coating
  • 17-7 PH corrugated diaphragm with GTP+ coating for ranges below 100 bar-1500 psi

Further versions available on request.

Downloads for MX

  • ATEX Certifications - CESI 02 ATEX 107 Certificate

  • Manual of electrical installation for pressure probes

  • it
  • de
  • en
  • User’s Manual – Pressure Sensors for high temperature

  • fr
  • it
  • de
  • en
  • Kunstoffemagazine 12/2010: Schmelzedruckmessung mit neuem Impuls

  • all
  • ATEX Certifications - CESI 02 ATEX 107 Certificate

  • all
  • EAC Generic Conformity Certificate

  • all
  • EU Conformity declaration_MX FS min 500bar

  • all
  • EU Conformity declaration_MX FS over 500bar

  • all
  • GTP+ FDA Certificate

  • all