text.skipToContent text.skipToNavigation
MNIDCONF-MN

The MN series of Gefran, are pressure transmitters for using in High temperature environment and specifically designed for melt pressure measurement and available only to be used in large-scale fixed installations or in large-scale stationary industrial tools, typically extruders, or for laboratory B2B equipments for R&D purposes according to the European Directive 2011/65/EU (see informative note RoHS II). The MN series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of the pressure. The fluid-filled system assures the temperature stability. The phisical measure is transformed in a electrical measure by means the strain-gauge technology.

Out of Stock

  • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Strain gage Wheatstone bridge
  • Accuracy : <±0.25% FS (H); <±0.5% FS (M)
  • Internally generated 80% calibration signal (R-Cal)
  • Fluid-filled system for temperature stability
  • Grade of protection: IP65
  • 1/2-20 UNF, M18x1.5 standard threads; other types available on request
  • Standard diaphragm is 15-5 PH stainless steel with GTP+ coating
  • 17-7 PH corrugated diaphragm with GTP+ coating for ranges below 100 bar-1500 psi

Other diaphragms available on request.

Downloads for MN

  • Manual of electrical installation for pressure probes

  • it
  • de
  • en
  • User’s Manual – Pressure Sensors for high temperature

  • fr
  • it
  • de
  • en
  • Kunstoffemagazine 12/2010: Schmelzedruckmessung mit neuem Impuls

  • all
  • GTP+ FDA Certificate

  • all
  • UK Conformity declaration - M series FS min 500 bar

  • all
  • UK Conformity declaration - M series FS over 500bar

  • all