text.skipToContent text.skipToNavigation
MDIDCONF-MD

The MD series of Gefran, are pressure transmitters for using in High temperature environment and specifically designed for melt pressure measurement and available only to be used in large-scale fixed installations or in large-scale stationary industrial tools, typically extruders, or for laboratory B2B equipments for R&D purposes according to the European Directive 2011/65/EU (see informative note RoHS II).

Out of Stock

  • Digital output signal with DP404 CAN OPEN communication protocol
  • Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud)
  • Software / Hardware selection of Baud rate and ID nodes
  • Operation with 1 or 2 settable alarm limits
  • ”Autozero” for temperature compensation
  • Zero and span drift compensation
  • 80% FS calibration signal
  • Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Extensimetric measurement principle with Wheatstone bridge
  • Precision: < ± 0.25% FS (H); < ±0.5% FS (M)
  • Hydraulic transmission system to guarantee temperature stability.
  • Protection level: IP65
  • Standard threading: 1/2-20 UNF, M18x1.5; other versions on request
  • Standard diaphragm is 15-5 PH stainless steel with GTP+ coating
  • 17-7 PH corrugated diaphragm with GTP+ coating for ranges below 100 bar-1500 psi

Further versions available on request.

Downloads for MD

  • EDS (MD, WD, KD CanOpen)

  • all
  • Can Open DP404 Digital Output (Operating Handbook)

  • en
  • Manual of electrical installation for pressure probes

  • it
  • de
  • en
  • User’s Manual – Pressure Sensors for high temperature

  • fr
  • it
  • de
  • en
  • Kunstoffemagazine 12/2010: Schmelzedruckmessung mit neuem Impuls

  • all
  • EAC Generic Conformity Certificate

  • all
  • EU Conformity declaration_not amplified Melt K min 500bar

  • all
  • GTP+ FDA Certificate

  • all